Handy Calibrator CA-10

Handy Calibrator
CA-10

| Main specifications |

The CA-10 directly calibrates accelerometers, on site Piezoelectric accelerometers are widely used to analyze vibrations and diagnose the performance of rotating machinery. Checking the sensitivity of accelerometers after they have been used under harsh conditions or for a long time has usually been left to the manufacturers because of the expensive calibration equipment required.
The CA-10 integrated the exciter, amplifier and display in a single unit. All you have to do is attach the sensor, for a speedycalibration of the sensor's sensitivity. You will now be able to gather reliable data with confidence, any time that you need to.

Calibration range	"Normal" accelerometers 0 to 19.99pC/m/s²
Calibration range	Accelerators with built-in "pre-amp." 0 to 19.99 mV/m/s²
Calibratable sensor weight	Approx. 130g or less
Calibration accuracy	±(3%+2digit)(23±5ºC)
Exciter vibration acceleration	4.9m/s²±3%(23±5ºC)
Exciter vibration frequency	159.2Hz±2%
Sensor attachment	M6 female, depth of 6.5 mm
Usable temperature range	0ºC to 50ºC
Storage temperature range	-10ºC to 50ºC
Batteries	4 AA batteries
Power consumption	120mA MAX.
Battery life	Continuous use: approx. 8 hours, for approx. 1,500 calibrations (Calibration sensor weight: 40gm ) (Time for single calibration: approx. 30 sec.)
Power supply for accelerometer	DC 24 V 2 mA Constant current supply Current values may differ from those specified
Dimensions(W×H×D)	Approx. 120mm×49mm×140mm
Weight	Approx. 1 kg (Including batteries)
Accessories Included Cable	LN-023 0.5m Miniature-BNC 1
Batteries	4 AA batteries
Conversion studs	M6-M4, M6-10-32, M6-flat, M6 standard stud (one each)
Packing box	1
Instruction manual	1

Product Inquiries

Repair Inquiries

Global Distributors