Color graphic Digital Indicator TD-275T

Color graphic Digital Indicator
TD-275T

| Main features | Main specifications | Option |

TD-275T is a digital indicator unit for viewing such as force, pressure, torque data as a waveform and numerical data. It is connected with load-cell(strain gauge type)

Measured data can be stored to CF card (CSV format) and utilized for quality management.Also it is possible to analyze the details using PC at the measuring sight.

RS-232C interface, LAN interface, D/A conveter card are provided as options.These provide monitoring system using PC or Workstation.
And these have a hold function, so these can be used at a production site for instrumentation indicator for load-cell.

TD-275T has a capability of reading TEDS(transducer electronic data sheet) parameter.So setting time will be shorter and error for settings can be avoided using TEDS type transducer.Also it is possible to measure accurately.


3.5inch STN Color LCD modle

Numeric data / waveform available

TEDS(Transducer Electronic Data Sheet)

CF card slot standard deployment(CF card is sold separately)

RS-232C,LAN,D/A converter(Option) (Specify one when you order)

Power supply:AC100V to 240V (3P terminal)

Dimension(W×H×D):Approx. 105mm×108mm×145.1mm(excluding tang)

Weight:Approx. 1.05kg(excluding Option)

■Load Sensor input
Input/Range		Strain gauge type sensor 0.5 to ±3.0mV/V
Input connector		Screw connection-type terminal(pitch5.08mm 12P)
Excitation	Voltage	DC2.5V±10%/10V±10%
	Current	30mA
Calibration method		Equivalent Input/TEDS/Real Load
Band of calibration		0.5 to 3.0mV/V
Accuracy of calibration		< 0.1%F.S
Zero balancing		0 to ±2.0mV/V
Accuracy/Nonlinearity		< 0.02%F.S±1digit(Input > 1mV/V)
Zero drift		< 0.5μV/ºC(Input conversion value)
Gain drift		< 0.01% F.S/ºC
Analog filter		Selectable 10,30,100Hz(default),300Hz Low pass filter:Attenuation -6dB/OCT
A/D conveting rate		2000times/sec. Quantization 16bits
TEDS function		IEEE 1451.4 Class 2 mix mode interface
Peak-hold function		Digital hold
Analog output		Approx. 1.0V(per sensor input 1.0mV/V)
■Other specifications
Display/Operation		3.5inch STN Color LCD modle (320×240dot)
Operation		Touch panel
Max value	Load	0 to ±9999
	Displacement	0 to ±9999
Decimal point		Selectable display position
Display timing		3times/sec.
Time axis setting		0.5/1/2/5/10sec.
Indication item		Digital load value,Waveform,Setting,Distortion,etc.
Display item　Status	Comparison judgment value setting	Load:HI/LO/HI-HI/LO-LO limit Displacement:HI/LO limit
	Hold function	Inflection point,Sample,Peak/maximum value,Minimum value
	Others function setting	Analog/Digital filter,Digital zero,Measurement start/end condition Graph setting,CF card setting,Minimum scale,etc.
	Measurement work setting memory	Selectable 16kinds(Comparison value judgment,Hold setting,start/end condition)
	Clock function	Management of data by a real-time clock
Judgment output signal	Load	HI/LO/HI-HI/LO-LO,GO Output,Each a contact
	Displacement	HI/LO,GO Output,Each a contact
Point of contact	Rating voltage	30V
	Current	50mA
	Insulation	Photocoupler
Control input/output signal		Measurement start/end,Sample hold,Reset,Digital Zero Work change input,Measurement completed　Output
Connector		Multi-electrode connector(FCN-365P032-AU)
Rated Input signal		Dry contact Input(Contact,Transistor opening collector,etc.),Outflow current:Approx. 10mA
Output signal	Rated Voltage	30V
	Current	50mA
Insulation		Photocoupler
CF card		Saving data to CF card on CSV format.Saving load data from start to stop or Automatic start level to judgement output.The result also saved.
Power supply		AC100V to 240V (3P terminal) Approx. 15W
Environment	Temperature	Compensated range:0ºC to 40ºC　Storage range:-20ºC to 60ºC
	Humidity	<85%RH(Non-condensing)
Dimension(W×H×D)		Approx. 105mm×108mm×145.1mm(excluding tang)
Weight		Approx. 1.05kg(excluding Option)
Accessory(each1）		Manual(CD-ROM),Outlin manual,Sensor input connector(Phoenix Contact MC1.5/12-STF-5.08),Control input/output connector/plug(FUJITSU) (connector:FCN-361J032-AU,cover:FCN-360C032-B)
Regulations	EMC	VCCI(classA) EN55011(classA),EN61326-4-2,3,4,5,6,8,11, EN61000-3-2,3
	Safety	EN61010-1

Figure of dimensions(mm)

*■Only one option can be installed (excluding CF card)
■RS-232C (Specify option when you order)	Signal level	RS-232C Conformity
	Electrical transmission distance	Approx. 10m
	Transfer method	Start/Stop synchronization,Full duplex
	Transfer speed	4800/9600/19200/38400/57600/115200bps
	Bit pattern	Start bit 1bit Character length:8bit Stop bit:1bit Parity bit:Selectable from Nothing/Odd number/Even number
	Cord	ASCII
■LAN (Specify option when you order)	LAN Interface	100BASE-TX/10BASE-T Automatic recognition
	Connections	1
	Connector	RJ-45
	LED Display	Link/Activity LANTRONIX XPort use
■D/A converter (Specify option when you order)		D/A Zero setting,(For a digital value by full scale setting)
	Voltage output	0 to ±10V(Load <2kohms)
	Current output	4 to 20ｍA(Load <500ohms)
	CAL function	0 or 10V cal signal and 4 or 20mA cal signal can be output.

Product Inquiries

Repair Inquiries

Global Distributors