| Excitation |
DC10V,2.5V Output Current: < 30mA
Setting from panel key. |
| Maximum input |
-3.0 to 3.0mV/V(Digital adjustment) |
| Zero balancing |
0.5 to 3.0mV/V |
| Minimum sensitivity |
1µV/count (1/10000 guaranteed at > 1mV/V input) |
| Equivalent Input calibration |
Setting range |
0.5 to 3.0mV/V |
| Error |
< 0.1%F.S.
(Input:0.5mV/V) |
| A/D converter |
Conveting rate |
100times/sec. |
| Resolution resolving power |
16bit(Binary) |
| Display section |
Indicator |
Character height 16mm red LED numericals display |
| Indicated value |
±0 to ±19999(5-digit) |
| Display timing |
Selectable at 3,6,13 and 25times/sec. |
| Status display |
5red LED display for HI,OK,LOW,PEAK,HOLD |
| Decimal point |
Selectable decimal point display position |
| Accuracy |
Nonlinearity |
< 0.02%F.S.±1digit
(at 3mV/V input) |
| Zero drift |
< 0.5µV/ºC RTI |
| Gain drift |
< 25ppm/ºC
|
| Hold function |
Selectable Sample hold/Peak-hold function at mode choice of the panel key.
Peak-hold function:High-speed analog hold method
Performance response speed:Approx. 1kHz(at sine wave input, analog filter 3kHz)
Accuracy:< 0.1%F.S.
Reset time:< 50µsec. |
| Serial data output |
SI/F(Serial data interface) |
Transfer method:start-stop synchronous communication
Transfer speed:1200/2400/4800/9600bps |
| Analog voltage output |
Analog voltage proportional to sensor input.
Output level:Approx. 2V per 1mV/V input(not isolation) |
| Zero tracking |
The Zero Tracking function automatically tracks and compensates a fine shift of the zero point due to factor such as a drift.
hour:#.#sec width:##scale |
| Motion detect |
Setting of parameters for detecting stable measurement is required.
hour:#.#sec width:##scale |
| Analog filter |
Low pass filter
Cutoff frequency: 4Hz/10Hz/100Hz/3kHz(Setting from panel key) |
| Digital filter |
The Digital Filter function obtains the moving average of A/D converted data and stabilizes the indicated values.
The moving average count can be selected from OFF/4/8/16/32/64times. |
| Power supply voltage |
AC100V to 220V+10%/-15% (Free power supply) 50/60Hz |
| Power consumption |
Approx. 10VA |
| Environment |
Temperature |
Operating range:-10ºC to 40ºC
Storage range:-40ºC to 80ºC
|
| Humidity |
< 85%RH(Non-condensing) |
| Dimension(W×H×D) |
Approx. 96mm×96mm×135mm (excluding tang) |
| Weight |
Approx. 900g |
| Option |
TD-2703:BCD Parallel data output
TD-2704:RS-232C Interface
TD-2407-V:D/A converter output (Voltage output) Specify option when you order
TD-2407-A:D/A converter output (Voltage output) Specify option when you order |
