| Excitation Voltage |
DC10V±5% Output Current: < 120mA
Remote sense type (Up to four 350ohms load cell can be connected in parallel.) |
| Zero/Span adjustment |
Zero balancing(Digital adjustment) |
HI Gain:0 to 1.5mV/V
LO Gain:0 to 3.0mV/V
*Select from 0.5mV/V or 1mV/V input. |
| Span adjustment range(Digital adjustment) |
HI Gain:0 to 1.5mV/V
LO Gain:0 to 3.0mV/V
*Selectable Hi/Lo gain (By Load cell output)
(Switch of the back panel) |
| Minimum sensitivity |
0.5µV/count |
| Accuracy |
Nonlinearity |
< 0.01%/F.S. |
| Zero drift |
< 0.2µV/ºC RTI |
| Gain drift |
< 15ppm/ºC
|
| Noise |
< 0.1µVp-p RTI |
| Analog filter |
Vessel type low pass filter(-12dB/oct.)
Select from 2Hz/4Hz/6Hz/8Hz |
| A/D conveting rate |
Conveting rate |
2000times/sec. |
| Resolution resolving power |
16bit(Binary) |
| Minimum resolution resolving power |
Rate |
100times/sec. ,16bit |
| Secondary calibration |
1/10000 |
| ■Display section |
| Numerical display tube |
Character height:12.5mm |
| Indicated value |
5-digit,sign:Negative sign display
|
| Capacity |
Setting allowable 5-digit of numerical |
| Minimum scale |
Setting allowable in the range of 1 to 100 |
| Decimal point |
88.8.8.8 Selectable decimal point display position
(Zero blanking function) |
| Over display |
A/D converter input over/Net Over/Capacity+9 scale division/Gross Over |
| Center zero |
A true zero point or the center o each value is displayed. |
| Unit |
Select from Slb,N,kg,g,t,and No unit |
| Status display |
SP3/SP2/SP1/LOCK/ZT/ZALM/STAB/TARE/NET/GROSS/HI LIM/HI/GO/LO/LO LIM/HOLD/NZ |
| ■Setting section |
| Memory of set value |
Initial setting value |
Initial setting value:NOV RAM(NonvolatileRAM)
|
| Others setting value |
C-MOS RAM(> 7years) |
| Protection of setting value |
Lock function |
| ■General performance |
| Power supply voltage |
100V,120V,200V,220V,240V 50/60Hz |
| Power consumption |
15VA |
| Environment |
Temperature |
-10ºC to 40ºC |
| Humidity |
< 85%RH(Non-condensing) |
| Dimension(W×H×D) |
Approx. 192mm×96mm×160mm(excluding tang) |
| Weight |
Approx. 2.2kg |
| ■Interface |
SI/F 2line type serial interface
TD-1411(SPI) Setpoint unit use interface(option)
TD-1403A(BND) BCD parallel data output interface(option)
TD-1404A(RS-232C) RS232C interface(option)
TD-1410A(RS-485) RS485 interface(option)
TD-1407A(D/A) D/A converter(option) |
