 |
LX-100Series data accquisition and recording system. TEAC has been desined for fast set-up,reliable recording applications in the field and in the laboratory. Building upon the success and convenience of TEAC DAT recorders,
the LX-100Series enables recording of wider bandwidths,has built-in connectivity with sensors, removable solid-state digtal recording media,easy and fast PC connection,and is desigened to provide cost-efficient data recording and front-end solutions. |
|
|
|
|
 |
|
| Possible to record longer using high capacity CF card |
| FAT32 file system for large capacity card
Up to 8GB card can be used at the moment.(As of March, 2008) |
|
| It achieves 100dB dynamic range by 24 bits AD* |
| (*PA amp 10V range.) |
|
| Records voltage, sound, vibration and
strain from DC to 40kHz bandwidth |
|
| Records in TAFFmat data format. |
|
| Supports various popular analysis software formats |
The recording format is TAFFmat which is
compatible with Windows file system and
it is commonly used by TEAC Digital Data
Recorders. The TAFFmat data file can be
read by LX View software and by many
other popular analytical software
applications.
General analysis software(Commercial product)
- Flex Pro7 Win Professional
- DADiSP/2002
- ME'scope Visual Engineering Series
|
|
| Up to 128 channels of synchronous recording |
 |
|
Up to 32 data channels can be recorded using an expansion unit.
Up to four LX-100 units can be synchronized to achieve as much as 128 recording channels.
(Recording synchronization is an oputinal fanction) |
|
| The wideband multi channel recording |
| 20kHz×8channels.It's twice the bandwidth as a DAT recorder provides.
*16bits AD mode |
|
| The analog monitor output is available during recording. |
| Time base conversion is possible in playback. |
|
| Through a remote control unit (stand-alone)
or PC (LX Navi software), the LX-100 Series
can be fully controlled |
|
| Trigger recording Voice Memo recording |
| A voice memo can be recorded, which simplifies the future data
searches. Trigger recording offers the pre-trigger, level-trigger,
the repeat and interval recording. |
|
| AQ-VU is a visual data recorder with which 4-channels of video and analog signals can be synchronously recorded |
 |
|
AQ-VU is a visual data recorder with which 4-channels of video and analog signals can be synchronously recorded and played back.
By synchronizing LX-100 series data recorder with AQ-VU, a variety of data measurements are possible. |
|
|
|
|
 |
Selection compositions |
 |
|
| ■Select1:Main Body LX-110/LX-120 |
| LX-110 Standard Model |
| The LX-110 provices superpir recording and playback performance with selectable recording media and input/output configurrations. |
| LX-120 High Specification Model |
| In addition to all recording and playback features of the LX-110, LX-120 provices the selection of additional sampling rate and Tachometer pulse inputs. |
|
| ■Select2:Choice of Number.of channels |
Up to 32 channels
8 or 16 recording channels with a main unit or 32 channels using an expansion unit. |
|
| ■Select3:Choice of Amplifier |
Various sensor amplifiers are available. Expandable amplifier with 8 channels per unit.
Three types of input amplifier cards are available:
A DC input amp card with lower sampling(from 1kHz to 1/60Hz),a selectable DC/IEPE accelerometer input amp card, and a selectable DC/IEPE accelerometer input amp card.
The output amplifier card outputs the analog voltage during recording and plays-back the analog voltage. |
| IEPE:Integrated Electronics Piezoelectric. |
|
| ■Select4:Choice of Recording Devices |
| Internal Memory&PC card |
| Memory - From standard 64MB to 576MB of internal memory achieving the maximum recording rate. |
| PC card - Supports up to 8GB PCMCIA Type II or Compact Flash enabling the recording in harsh environments |
|
| ■Select5:Choice of Interface |
| Ethernet/Firewire(IEEE1394) |
 |
|
Simultaneous recording to media and PC with a selection of interfaces.
A Firewire(IEEE1394)or 100BASE-TX Ethernet interface are available for the connection to the PC. The data can be transferred to a PC in real-time and displayed, processed and stored in the PC HDD. |
|
| ■Select6:Choice of Control Unit |
| Remote Control Unit or PC |
| Through a remote control unit(stand-alone)or PC(LX Navi software),the LX-100 Series can be fully controlled. |
|
|
|
|
 |
|
| ■Main specifications |
Sampling Frequencies
(LX-110/LX-120) |
96/48/24/12/6/3/1.5kHz
(Common to each Channel) |
| Low speed sampling |
Cutoff Frequency |
Attenuation |
| 1kHz |
400Hz |
-80dB
(at 500Hz) |
| 500Hz |
200Hz |
-80dB
(at 250Hz) |
| 200Hz |
80Hz |
-80dB
(at 100Hz) |
| 100Hz |
40Hz |
-80dB
(at 50Hz) |
| 50Hz |
20Hz |
-80dB
(at 25Hz) |
| 20Hz |
8Hz |
-80dB
(at 10Hz) |
| 10/5/2/1Hz |
4Hz |
-80dB
(at 5Hz) |
| 2/5/10/30/60s(cycle) |
4Hz |
-80dB
(at 5Hz) |
|
| (Aliasing will occur at and under 5Hz sampling) |
Sampling Frequenies
LX-120 |
102.4/51.2/25.6/12.8/5.12/2.56/1.28kHz
65.536/32.768/16.384KHz
8.192/4.096/2.048/1.024KHz
100/50/20/10/5/2/1kHz(Common to each Channel) |
| Tachometer Pulse Input |
|
(Cannot be used simultaneously with generator output) |
| Num. of Input Channels |
2 x16 bit Channels,2 x32 bit Channels(Highest sampling frequency settings support the moving average only at one(1)) |
| Use the lowest 1bit for techometer pulse timing bit. |
| Input Format |
Threshold level selections +0.5/1/2.5/10/20 V(Max allowable input voltage is 50V) |
| Input Connector |
BNC |
| Frequency Division Ratio Setting |
1 to 255 |
| Moving Average Measurement |
1 to 16 |
| Measurement Mode |
Pulse count mode(Count of number of pulses within the gate time; Conunt of the total number from start to stop),Cycle count mode,Frequncy measurement mode,RPM mode |
Generator Output
LX-120 |
|
(Cannot be used simultaneously with tachometer pulse input) |
| Num. of Output Channels |
1ch(Monitor output and a combined use) |
| Output signal |
Sine wave,Sweep Sine wave,Pulse,Pink noise,White noise |
| Input Channel change |
1/2/4/8/16/24/32ch |
| Recording Devices |
|
Choice of Memory only,Memory+PC card drive* |
| Memory |
From the standard 64MB to a maximum of 576 MB |
| PC card |
Flash memory, supports up to 8GB capacity(FAT16 or FAT32) |
| |
*Please refer to homepage reference or business for the recommended PC Card. |
| Inteface |
Choice of 10BASE-T/100BASE-TX or Firewire(IEEE1394)(Specify one when you order) |
| Front Panel Control Keys |
REC FWD,REC FWD,STOP,PAUSE,EVENT,P.LOCK |
| Monitor Channel |
1(analog output),BNC |
| Monitor output level |
±1 to 5 V(0.1V step) |
| Microphone Jack |
1 |
| Speaker and Earphone Jack |
1 each |
| MAX. Recording Rate |
Memory |
Approx.1.6 MB/sec. |
| PC card |
Approx.0.8 MB/sec. |
| PC Throughput |
IEEE1394 |
Approx.1.6 MB/sec. |
| Ethernet |
Approx.0.8 MB/sec. |
| Time Precision |
±1ppm(25ºC) |
| Internal Clock Correction |
±30seconds adjustment |
| Environment |
Temperature |
0ºC to 45ºC |
| Humidty |
10% to 80%RH(non-condensing) |
| Safety Standards |
CE,VCCI |
| Vibration |
Conforms to MIL-STD-810 Figure 514.4-1,2,3 for the models with memory only memory + PC card drive |
| Power consumption |
LX-110 |
DC Input Amp |
Input |
8ch |
30W |
| 16ch |
36W |
| 32ch |
48W |
| Input and Output |
8ch |
36W |
| 16ch |
48W |
| PA Amp |
Input |
8ch |
35W |
| 16ch |
46W |
| 32ch |
66W |
| Input and Output |
8ch |
46W |
| 16ch |
66W |
| StrainInput Amp |
Input |
8ch |
40W |
| 16ch |
56W |
| 32ch |
86W |
| Input and Output |
8ch |
56W |
| 16ch |
86W |
| LX-120 |
DC Input Amp |
Input |
8ch |
36W |
| 16ch |
42W |
| 32ch |
56W |
| Input and Output |
8ch |
42W |
| 16ch |
56W |
| PA Amp |
Input |
8ch |
41W |
| 16ch |
52W |
| 32ch |
76W |
| Input and Output |
8ch |
52W |
| 16ch |
76W |
| StrainInput Amp |
Input |
8ch |
46W |
| 16ch |
62W |
| 32ch |
92W |
| Input and Output |
8ch |
62W |
| 16ch |
92W |
| Power Supply |
DC11V to 30V |
Dimension(W×H×D)
(Excluding protruding Parts) |
Approx. 300mm×65mm×200mm
Approx 11 13/16" × 2 9/16" × 7 7/8"
*expansion box use(32ch,16chInput and Output),H Approx. 105mm |
| Weight |
LX-110 |
Input |
8ch |
3.7kg/7.9lb |
| 16ch |
3.9kg/8.6lb |
| 32ch |
6.1kg/13.4lb |
| Input and Output |
8ch |
3.9kg/8.6lb |
| 16ch |
6.1kg/13.4lb |
| LX-120 |
Input |
8ch |
3.7kg/8.1lb |
| 16ch |
4.0kg/8.8lb |
| 32ch |
6.2kg/13.6lb |
| Input and Output |
8ch |
4.0kg/8.8lb |
| 16ch |
6.2kg/13.6lb |
| Standard accessories |
DC Power Cable/AC Adaptor/Standard software[LX-Navi] /Instruction Manual |
| Software[LX-Navi] Support OS |
Windows XP,Windows2000 |
|
|
|
| ■Input Amp specifications DC Amp AR-LXDC100 |
| Input Format |
Unbalanced |
| Input Coupling |
DC |
| Input Impedance |
1Mohms |
Input Range
(over-range to±127%) |
±0.5/1/2//5/10/20/50V |
| Absolute Max. Input Voltage |
±100V |
| Anti aliasing filter |
Joint use of both a digital filter* and an analog filler(2nd Order Butteworth) |
| LPF |
- |
| Frequency Bandwidths |
DC to the sampling frequency(listed above)/2.4±0.5 dB |
| Num,of Quantizing Bits |
16bits/24Bits |
| Conversion Method |
128 times over sampling delta sigma method:however 64-times over sampling at 40kHz |
| Linearity |
±0.1% or less |
| Distortion Factor |
Sampling
Frequenies |
Measurement
Fequency |
Distortion
factor |
| 96kHz |
20kHz |
±0.1%
or less |
| 48kHz |
10kHz |
±0.07%
or less |
24kHz
or less |
fs/4.8 |
±0.4%
or less |
|
| Range Accuracy |
±0.1% or less |
| Signal to Noise ratio(16bits/24bits)(25ºC) |
| Input Range |
band |
Signal to
Noise ratio |
| Other of 20V |
in band |
84dB
/94dB |
| 20V |
80dB
/88dB |
|
S/N is a difference of noise level for 100% of each input range.
Dynamic range is the greatest input level and a difference of noise level of each input.Dynamic range ≈S/N +2dB
The overall accuarcy specified here is the accuracy of the analog output when using an input amp and an analog output amp, and may
differ depending on the frequency characteristics and the input range of the input amp. |
Crosstalk
|
| Input Range |
band |
Crosstalk |
| All |
20kHz |
-82dB
/-88dB |
40kHz
or less |
-80dB
/-86dB |
|
| Inter-channel phase difference |
1deg or less(At 20kHz or less),3deg or less(At 40kHz or less) |
| Input Connecter Type
|
BNC |
|
|
|
| ■Input Amp specifications PA Amp AR-LXPA100 |
| Input Format |
Balanced and Unbalanced |
| Input Coupling |
Balanced DC,Balanced AC,UnbalancedDC |
| Input Impedance |
1Mohms |
| Input Range(over-range to ±127%) |
±0.01/0.0316/0.1/0.316/1/3.16/10/50V |
| Absolute Max. Input Voltage |
± 50 V,but±100 V in the±50V range |
| Weighting |
FLAT/A/C |
| HPF |
OFF/10/20Hz |
| Supply voltage for a sensor |
28V DC/4mA |
|
| Anti aliasing filter |
Joint use of both a digital filter* and an analog filler(2nd Order Butteworth) |
| LPF |
- |
| Frequency Bandwidths |
DC Coupling |
DC to the sampling frequency(listed above)/2.4 |
| AC Coupling |
AC Coupling:1Hz to the sampling frequency(listed above)/2.4 ±0.5dB |
| Num,of Quantizing Bits |
16bits/24Bits |
| Conversion Method |
128-times over sampling delta sigma method:however64-times over sampling at 40kHz |
| Linearity
|
±0.1% or less |
| Distortion Factor |
Sampling
Frequenies |
Input
Range |
Distortion
Factor |
| 96kHz,48kHz |
0.316V or over |
±0.1%
or less |
| 0.1V or less |
±0.2%
or less |
24kHz
or less |
All |
±0.4%
or less |
|
| Range Accuracy |
±0.1% or less |
Signal to Noise ratio
(16bits/24bits)(25ºC) |
| Input Range |
|
Signal to Noise ratio
(16bits/24bits) |
| band |
20kHz |
40kHz or less |
| 0.01V |
64dB
/67dB |
60dB
/63dB |
| 0.0316V |
74dB
/77dB |
69dB
/72dB |
| 0.1V |
83dB
/86dB |
77dB
/80dB |
| 0.316/1V |
87dB
/93dB |
77dB
/80dB |
3.16V
/10/50V |
87dB
/98dB |
77dB
/80dB |
|
S/N is a difference of noise level for 100% of each input range.
Dynamic range is the greatest input level and a difference of noise level of each input.Dynamic range ≈S/N +2dB
The overall accuarcy specified here is the accuracy of the analog output when using an input amp and an analog output amp, and may
differ depending on the frequency characteristics and the input range of the input amp. |
Crosstalk
|
| Input Range |
|
Crosstalk |
| band |
20kHz |
40kHz
or less |
| 0.01V |
-64dB |
-60dB |
| 0.0316V |
-73dB |
-69dB |
| 0.1V |
-78dB |
-74dB |
| 0.316/1V/3.16V/10/50V |
-78dB |
-74dB |
|
| Inter-channel phase difference |
1deg or less(At20kHz or less),3deg or less(At 40 kHz or less) |
| TEDS sensor
|
Possible(V0.9) |
| Input Connecter Type |
BNC |
|
|
|
| ■Input Amp specifications Strain Amp(AR-LXST100) |
| Input Format |
Balanced |
| Input Coupling |
DC |
| Input Impedance |
1Mohms |
Input Range
(over-range to ±127%) |
DCmode:±1/2/5/10V |
STmode:500/1000/2000/5000/10000/20000/50000/100000µST
Precision(range value)±1% or less |
| Absolute Max. Input Voltage |
±25V |
| Gauge Factor |
2.0 |
| Applicable Gauge Resistance |
120 to 2000ohms |
| Remote Sensing |
Remote Sensing |
| Balance Range |
±10000µST |
| Balance Method |
By electonic auto balance |
| Bridge Connection |
Full Bridge |
| Bridge Method |
DC |
| Bridge Voltage |
2V(±1V) |
| 10V(±5V) |
|
| Anti aliasing filter |
Joint use of both a digital filter* and an analog filler(2nd Order Butteworth) |
| LPF |
10,30,100,300,1k,3k,10k,30kHz,Pass:-48dB OCT Butterworth filter(Switced Capacitor Filter =SCF)for 8 channels indeependent;At LPF to Pass Joint use of both a digital filter* and an analog filter(2nd Order Butterworth) |
| Frequency Bandwidths |
DC Method |
DC to the sampling frequency(listed above)/2.4, +0.5/-3dB |
| AC Coupling |
DC to30 kHz, +0.5dB/-3dB |
| Num,of Quantizing Bits |
16bits/24Bits |
| Conversion Method |
128-times over sampling delta sigma method:however64-times over sampling at 40kHz |
| Linearity |
±0.1% or less |
| Distortion Factor |
DC mode |
same as DC100 |
| ST mode |
(SCF:10kHz,30kHz),Sampling Frequenies 24kHz,96kHz 10000µST0.1% or less |
| Range Accuracy |
±0.1% or less |
| Signal to Noise ratio(16/24bits)(25ºC) |
| Input Range |
|
Signal to
Noise ratio |
| band |
1kHz |
3kHz |
10kHz |
20kHz |
40kHz |
| 0.25mV/V |
67dB |
62dB |
58dB |
- |
- |
| 0.5mV/V |
73dB |
68dB |
64dB |
- |
- |
| 1mV/V |
75dB |
74dB |
71dB |
- |
- |
2.5/5/10/
25/50mV/V |
75dB |
75dB |
75dB |
- |
- |
| 1/2/5V |
- |
- |
- |
87dB
/93dB |
77dB
/83dB |
|
S/N is a difference of noise level for 100% of each input range.
Dynamic range is the greatest input level and a difference of noise level of each input.Dynamic range ≈S/N +2dB
The overall accuarcy specified here is the accuracy of the analog output when using an input amp and an analog output amp, and may
differ depending on the frequency characteristics and the input range of the input amp. |
Crosstalk
|
| Input Range |
|
Crosstalk |
| band |
1kHz |
3kHz |
10kHz |
| 0.25mV/V |
-67dB |
-62dB |
-58dB |
| 0.5mV/V |
-73dB |
-68dB |
-64dB |
| 1mV/V |
-75dB |
-74dB |
-71dB |
2.5/5/10/
25/50mV/V |
-75dB |
-75dB |
-75dB |
|
| Inter-channel phase difference |
1deg or less(At20kHz or less),3deg or less(At 40kHz or less) |
| Input Connecter Type |
Lemo 7-pin,10Φ(ECGO Type) |
|
|
|
| ■Output Amp |
| Output Format |
Unbalanced |
| Output Coupling |
DC |
| Output Impedance |
75ohms |
| Output Range |
±1 to 5V,0.1VStep |
| Smoothing Filter |
Combination of Analog fillter＋ Digtal fillter |
| Frequency Bandwidths |
DC to the sampling frequency(listed above)/2.4 ±0.5 dB |
| Num,of Quantizing Bits |
16/24 Bits |
| D/A Conversion Method |
128-times over sampling delta sigma method:however64-times over sampling at 40kHz |
| Linearity |
±0.1% or less |
| Distortion Factor |
±0.2% or less |
| Range Accuracy |
±0.1% or less |
| Signal to Noise ratio(16bits/24bits)(25ºC) |
DC Input Amp |
87dB/93dB(in band)(1V input) |
| PA Amp |
87dB/93dB(in band)(10V Input) |
| DC Input Amp |
87dB/93dB(in band)(DC10V Input) |
Crosstalk
|
-78dB(At 20 kHz or less),75dB(At 40 kHz or less) |
| Inter-channel phase difference |
1ºC or less(At 20 kHz or less) 3ºC or less(At 40 kHz or less) |
| IOutput Connecter Type |
BNC |
|
|
|
| ■Frequency Bandwidth vs. Recording Time |
In LX-110/120, channel constitution, a recording medium, the choice of the record frequency band(it prescribes it by choice of the sampling frequency)are possible,
and record time is different by each combination. |
| ●An example)Nom.of 8Channels,576MB Memory |
Frequency Bandwidth
(Sampling Frequenies) |
Recording Time |
| 16bit |
24bit |
| DC to 40kHz(96kHz) |
Approx 6minute |
- |
| DC to 20kHz(48kHz) |
Approx 12minute |
Approx 6minute |
| DC to 10kHz(24kHz) |
Approx 24minute |
Approx 12minute |
| DC to 5kHz(24kHz) |
Approx 48minute |
Approx 24minute |
| DC to 2.5kHz(6kHz) |
Approx 1h36minute |
Approx 48minute |
| DC to 1.25kHz(3kHz) |
Approx 3h12minute |
Approx 1h36minute |
| DC to 675Hz(1.5kHz) |
Approx 6h24minute |
Approx 3h12minute |
| DC to 400Hz(1kHz) |
Approx 9h36minute |
Approx 4h48minute |
| DC to 80Hz(200Hz) |
Approx 48h |
Approx 24h |
| |
Note:Recording rate is approx 1.6MB/sec(DC to 40kHz bandwidth x8ch).Turning OFF the voice memo additionally |
| ●An example)Nom.of 8Channels,4GB PC card |
Frequency Bandwidth
(Sampling Frequenies) |
Recording Time |
| 16bit |
24bit |
| DC to 20kHz(48kHz) |
Approx 1h20minute |
- |
| DC to 10kHz(24kHz) |
Approx 2h40minute |
Approx 1h20minute |
| DC to 5kHz(24kHz) |
Approx 5h20minute |
Approx 2h40minute |
| DC to 2.5kHz(6kHz) |
Approx 10h40minute |
Approx 5h20minute |
| DC to 1.25kHz(3kHz) |
Approx 21h20minute |
Approx 10h40minute |
| DC to 675Hz(1.5kHz) |
Approx 42h40minute |
Approx 21h20minute |
| DC to 400Hz(1kHz) |
Approx 64h |
Approx 32h |
| DC to 80Hz(200Hz) |
Approx 320h |
Approx 160h |
| |
Note:Recording rate is approx 0.8MB/sec(DC to 20kHz bandwidth x8ch).Turning OFF the voice memo additionally |
|
|
|
|
 |
|
| Remote Control Unit |
 |
|
ER-LXRC100 |
- LCD:Color LCD 320x240 pixels
- Functions:r meter display,main-unit control(setting recording reproducing),Microphone input
- Dimension(W×H×D):Approx 170W x 30H x 100D mm(excluding protruding Parts)
- Weight:Approx 0.65 kg /1.4lb(excluding cables)
|
|
| Battery Unit,Battery Pack |
 |
|
Battery Unit BU-81 |
- HP-30L from Paco Electronics Industry Inc.
- Num.of Internal Battery Packs:3(battery packs is described below)
- Dimension(W×H×D):Approx 300W×27.5H×200D mm/12W×1H×8D in(excluding protruding Parts)
- Weight:Approx 1.5 kg/3 lb(excluding the battery pack and mounting brackets)
|
| Battery Pack HP-30L |
- Supply voltage:1.2V
- Capacity:3.3Ah
- Weight:Approx 700g /1.5lb
- Size:NP1type
|
| Battery charger for Battery Pack(KH-2S from Paco Electronics Industry Inc.) |
- Power Supply:100VAC(200VAC Automatic reshuffling)
- Slot for Battery Pack:4
|
|
| Vechicle mount adapters |
 |
|
TZ-LXVM |
|
| Front handle |
 |
|
TZ-LXFH |
|
| FlexPro7 Professional |
 |
|
|
|
| DADiSP/2002 |
 |
|
|
|
| ME'scope Visual Engineering Series(Used only in 16bits mode) |
 |
|
|
|
|
|
|
|
|
|
;)
