| SPECIFICATION |
| FDD Data Capacity |
1MB / 1.6MB / 2MB ( unformatted ) |
| FDD Data Transfer Rate |
250Kbps ( 1MB ) , 500Kbps ( 1.6MB , 2MB ) |
| USB Data Transfer Rate |
480Mbps ( max. ) |
| Track Density |
135tpi |
| Rotation Speed |
300min-1( rpm )/1MB , 2MB
360min-1( rpm )/1.6MB |
| Interface |
| [ FDD ] |
Floppy Disk Interface |
| [ Memory cards R/W ] |
High-Speed USB
( Compatible with the USB 2.0 Specification ) |
|
| Interface Connector |
| [ FDD ] |
34 pin usual FDD connector |
| [ Memory cards R/W ] |
4 pin connector for internal USB Headers |
|
| Supported Media |
| Media |
|
Capacity |
| Min |
Max |
| Secure Digital Card |
Spec |
8MB |
512MB |
| Multi Media Card |
Spec |
8MB |
128MB |
| Memory Stick |
Spec |
4MB |
128MB |
| Memory Stick Pro |
Spec |
256MB |
1GB |
| Smart Media |
Spec |
4MB |
128MB |
| Compact Flash |
Spec |
4MB |
128MB |
| Micro Drive |
Spec |
340MB |
1GB |
FD-CR7 Support Media List
(PDF)
|
| MTBF |
30,000 POH ( min ) ( for typical operation duty ) |
| Safty Standards |
UL , CSA and TUV approved |
| Ambient Temperature |
| Operating : |
5 - 40Co |
| Non-Operating : |
-20 - 60Co |
|
| Rerative Humidity |
| Operating : |
20 - 80% (non-condensing)
Maximum wet-bulb temperature of 29Co |
| Non-Operating : |
10 - 90% (non condensing)
Maximum wet-bulb temperature of 40Co |
|
| Vibration |
| Operating : |
| |
4.9m/s2 ( 0.5G ) or less ( 5 - 500Hz,1oct/min. sweep rate
) |
| Transportation : |
| |
19.6m/s2 ( 2G ) or less ( 5 - 500Hz ) |
|
| Shock |
| Transportation : |
| |
784m/s2 ( 80G ) ( single half-sine pulse,11ms
) or less |
|
| Power requirements |
| [ FDD ] |
DC+5V±10% / 310mA ( during writing , typ. ) |
| [ Memory cards R/W ] |
DC+5V±5% / 500mA ( during operation , max. ) |
|
| Dimensions |
101.6W x 25.4H x 144D mm ( excluding the cable &
protrusions ) |
| USB Cable length |
40cm approx. |
| Weight |
350g typ. |
