Return to HomeProductsDownloadSalesAbout DSPD

TEAC CD-ROM Drive Firmware Updater
License Agreement
Firmware updating programs for CD-ROM drive units purchased from TEAC Corporation can be downloaded here.

Cautions:

1. Select the program corresponding to the model number of the drive unit used. Using the incorrect program could damage the drive unit or the media or cause them to malfunction.
2. The firmware upgraded with these programs can be used only with the applicable drive units under the environment specified in the drive unit's instruction manual or as described below. TEAC does not warrant the drive unit or revised firmware when these are used in combination with any equipment or devices (including software) not recommended by the written notices.
3. The firmware is upgraded automatically by the applicable program. Never interrupt the updating operation. If updating is interrupted, the firmware will be corrupted.

All programs are protected by international copyright laws and international treaty provisions. If the program is duplicated or sold without the consent of the copyright owner, it will be regarded as an infringement of the civil laws and violation of the criminal laws. Violators will be subject to reparation for maximum damages based on the existing laws.

The use of the program is approved solely under the conditions of the following license agreement.

When you have read and agreed to the following license agreement, click the "I Agree" button. If you do not agree, click the "Disagree" button.

Firmware Revision Software License Agreement

IMPORTANT: PLEASE READ THIS AGREEMENT CAREFULLY.

This License Agreement is a legal agreement between you (either an individual or a single entity) and TEAC Corporation (hereinafter called "TEAC") for the Firmware Revision Software (which includes computer software and online and electronic documentations, and may include associated media and printed materials when supplied, collectively the "Software" hereinafter). By installing, copying, or other wise using the Software, you agree to be bound by the terms of this License Agreement. If you do not agree to the terms of this License Agreement, you cannot use the Software.

The Software is protected by the copyright laws and international treaty provisions, and all other applicable laws and treaties concerning intellectual property rights.

1. Grant of License.
This Agreement permits you to have the following rights. Use and copy: TEAC approves you to use the Software for the drive unit purchased from TEAC and owned by you (hereinafter called "Your Drive Unit"). You may make a copy of the Software for use with all of Your Drive Units, or for backup purposes.
2. Restrictions.
All the copies of the Software must hold the copyright notification. You may not allow the Software to be sold to any third party. Except to the extent expressly permitted by the laws of the jurisdiction where you are located, you may not analyze, decompile, disassemble or otherwise reverse engineer the Software. You may not allow the Software to be transferred to any third party. Only when Your Drive Units permanently transferred to a third party, may you transfer all the rights under terms and conditions of this Agreement.
3. Termination.
Your rights under terms and conditions of this Agreement will be terminated at the same time as you dispose of Your Drive Unit. If you fail to comply with any term or condition of this Agreement, TEAC may terminate your license while withholding any other rights of claim for you. In this case, you must destroy all the copies of the Software.
4. Copyright.
All the rights concerning the Software and its copies are owned by TEAC or its suppliers. All the rights and copyrights concerning the contents of the Software when being accessed come under jurisdiction of each copyright owner, and are protected by the lays and international treaty provisions concerning the copyright and intellectual properties. This Agreement does not allow you to be approved in any term or condition of the contents of this Agreement.
5. Limited Warranty.
The Software is to be used at your own risk. The Software is supplied on the assumption that it will be used with Your Drive Unit. Except as required under the terms and conditions of the applicable laws, TEAC and its suppliers do not provide a warranty of any kind, either express or implied, including but not limited to, any implied warranties or conditions of merchantability, quality, fitness for a particular purpose and no-infringement.
6. No Liability for Consequential Damages.
In no event shall TEAC or its suppliers be liable for any other damages whatsoever (including, without limitation, damages for loss of business, business interruption, loss of business information, or other pecuniary loss) arising out of the use of or inability to use this Software, even if TEAC has been advised of the possibility of such damages. Unless the responsibility for the above consequential or accidental damage is excluded or allowed to be limited by the laws or judgement of the court, the above limitations are not applicable to you.
7. Upper Limit of Responsibility
TEAC's indemnities and compensation demanded of you for breaking terms and conditions of the Agreement will not exceed, in any case, the amount you paid for Your Drive Unit.
8. Other.
This Agreement is governed by the laws of Japan.

I Agree I do not Agree



Copyright (C) TEAC Corporation. All rights reserved.