 |
| TEAC F/W Updater for
CD-R58S ( Ver.1.0P ) download |
| [ 2000.05.22 Released] |
|
|
| The contents
of the updated firmware |
| · |
The firmware was updated to solve the problem that the drive could
not recognize 80 min. discs. (revision 1.0P) |
| · |
Write quality was improved for TDK Disc. (revision
1.0N or higher) |
| · |
The writing quality with respect to 79-minute disc is to be improved.
(revision 1.0M or higher) |
| · |
The recognition time of the logically erased CD-RW disc is to be reduced.
(revision 1.0M or higher) |
| · |
Write quality was improved in 79min. disc. (revision
1.0K or higher)
( The application software which supports 79min. is required in order to
write 79min. ) |
| · |
CD-TEXT Read/Write function is supported. (revision
1.0J or higher)
( You need to use a writing software which supports the CD-TEXT format
to
enable this function. ) |
| · |
Optimum write laser power setting in accordance with the write disc
are improved. (revision 1.0H or higher)
|
|
|
|
|
| How to use
the Updater |
| · |
The downloaded file ( R58S10P01.EXE )is
compressed as a self-extracting archive file
Please extract the file to an appropriate folder on your hard disc.
|
| · |
When you run R58S10P01.EXE, the UPDATER.EXE,
the CDRFIRM.BIN, the README.TXT,
the READMEJ.TXT, the README.PDF
and the READMEJ.PDF
will be generated in the resulting folder named R58S10P01.
|
| · |
Run the UPDATER.EXE and follow the on-screen
instructions to update your firmware in the drive (CD-R58S).
|
|
|
|
|
| Precautions |
Be sure to observe the following precautions when running
UPDATER.EXE.
Please follow the instruction below, otherwise system
problem may be caused.
| · |
Disable the Auto insert notification (autorun). |
| · |
Be sure to extract and run the program
on your hard drive. |
| · |
Never turn OFF the power of your PC and
drive while running the Updater. |
| · |
Close any other active application software. |
| · |
Eject any disc in the drive (CD-R58S). |
| · |
When Microsoft Windows has been started using a SCSI hard disk, computers
may become unstable depending on the SCSI
card after running the Updater.
If this happens, turn the power off and back ON to run the Updater. If
"The selected drive's firmware is the latest version!" is displayed,
the firmware has been normally updated. |
|
|
|
|
| Contact |
Department/
Section |
Means of
contact |
Phone number/
E-mail address
|
| TEAC AMERICA, INC. |
TSG |
E-mail |
dspdtsg@teac.com |
| TEAC UK LIMITED |
TEL |
01923-225235 |
| TEAC DEUTSLAND GmbH |
E-mail |
support@ja.teac.de |
|
|
|
| Self-Extracting
file name |
Date |
Size |
Version |
| R58S10P01.EXE |
2000/ 5/22 |
290,200 Byte |
1.0P |
|
|
