 |
| TEAC F/W Updater for
CD-R55S ( Ver.1.0R ) download |
| [ 2000.02.01 Released] |
|
|
| The contents
of the updated firmware |
| · |
The firmware bug was corrected to avoid the condition where your computer
becomes unstable. (revision 1.0R) |
| · |
We improved case of inconvenience when do recording more than 86 track
by Disc At Once. (revision 1.0Q or heigher) |
| · |
Countermeasure against the firmware on which the written in multi session
cannot be recognized by a few CD-ROM Drives. (revision
1.0N or heigher) |
| · |
Recording quality was improved for CD-R media (silver type) made by
Ricoh. (revision 1.0L or higher) |
| · |
Video CD can be played back in MS-Windows NT4.0. (revision
1.0K or higher) |
| · |
Fixed the problem that the drive returns an incorrect free space capacity
on the display when used with certain writing software. (revision
1.0J or higher) |
| · |
Supported the CD-R DISC introduced in December, 1997 by TAIYOYUDEN
CO.,LTD. (revision 1.0H or higher) |
| · |
Improved SCSI transfer rate. (revision 1.0G or
higher)
The overhead time of the firmware has been reduced to improve the SCSI
transfer rate during write. |
| · |
Enabled the Disc At Once. (revision 1.0F or higher)
The Disc At Once operation is supported. (Please use the writing software
supporting the Disc At Once.) |
|
|
|
|
| How to use
the Updater |
| · |
The downloaded file ( R55S10R01.EXE )is
compressed as a self-extracting archive file
Please extract the file to an appropriate folder on your hard disc.
|
| · |
When you run R55S10R01.EXE, the UPDATER.EXE,
the CDRFIRM.BIN, the README.TXT,
the READMEJ.TXT, the README.PDF
and the READMEJ.PDF
will be generated in the resulting folder named R55S10R01.
|
| · |
Run the UPDATER.EXE and follow the on-screen
instructions to update your firmware in the drive (CD-R55S).
|
|
|
|
|
| Precautions |
Be sure to observe the following precautions when running
UPDATER.EXE.
Please follow the instruction below, otherwise system
problem may be caused.
| · |
Disable the Auto insert notification (autorun). |
| · |
Be sure to extract and run the program
on your hard drive. |
| · |
Never turn OFF the power of your PC and
drive while running the Updater. |
| · |
Close any other active application software. |
| · |
Eject any disc in the drive (CD-R55S). |
| · |
When Microsoft Windows has been started using a SCSI hard disk, computers
may become unstable depending on the SCSI
card after running the Updater.
If this happens, turn the power off and back ON to run the Updater. If
"The selected drive's firmware is the latest version!" is displayed,
the firmware has been normally updated. |
|
|
|
|
| Contact |
Department/
Section |
Means of
contact |
Phone number/
E-mail address
|
| TEAC AMERICA, INC. |
TSG |
E-mail |
dspdtsg@teac.com |
| TEAC UK LIMITED |
TEL |
01923-225235 |
| TEAC DEUTSLAND GmbH |
E-mail |
support@ja.teac.de |
|
|
|
| Self-Extracting
file name |
Date |
Size |
Version |
| R55S10R01.EXE |
2000/02/01 |
232,727 Bytes |
1.0R |
|
|
